Advantech APAX-5013 User Manual page 54

Digital Output

Channels: 12

Type: Sink

Voltage Range: 8 ~ 35 VDC

Rated Output Current at signal "1": 0.5 A (per channel)

Permitted Output Current (at signal "1"): max. 0.75 A

Output Current at signal "0" (leakage current): 0.1 mA

Lamp Load: max. 5W

On-State Voltage Drop: 0.15 V at 0.5 A

Switch Rate:
– For resistive load: max. 300 Hz
– For inductive load: max. 20 Hz
For lamp load: max. 200 Hz (Using 5W lamp and tested under 50 , 24 V)
–
Protection

Isolation: 2,500 VDC (Between channels and backplane bus)

Over Voltage Protection: ±70 VDC (for DI channel)

Short Circuit Protection (For DO channel)

Thermal Shutdown Protection (For DO channel)

Fail Safe Protection*
* When I/O module lose its communication with controller or coupler, the output chan-
nel will generate a pre-defined value
Environment

Operating Temperature: -10 ~ 60 C (when mounted vertically)

Storage Temperature: -40 ~ 70 C

Relative Humidity: 5 ~ 95% (non-condensing)
General

Dimensions (W x H x D): 30 x 139 x 100 mm

Weight: 165 g

Power Consumption: 2.5 W @ 24 VDC (typical)

Status Display: LED per channel
– On: Logic level "1"
– Off: Logic level "0"
APAX-5000 I/O Series User Manual 46