Table of Contents
Advertisement
6.
If you need more than one APAX-5000 I/O module, stack another APAX-5002
backplane to the original APAX-5002 backplane.
Warning! When you assembly different backplanes together, remember to turn off
the power connected to the backplane. If not, the backplanes may be
damaged. Turn on the power again after you complete the assembly for
all backplanes.
7.
Lock the stacked APAX-5002 backplane to the original APAX-5002 backplane
by the backplane locks.
Note!
If you want to provide more power to the system, you can connect
another power supply wire to the power connections on the second
APAX-5002 backplane. (The wiring procedure is the same as step 1)
APAX-5000 I/O Series User Manual
12
Hide quick links:
Advertisement
Table of Contents
