Table of Contents
Advertisement
2.
Attach the APAX-5002 backplane on the DIN rail.
3.
Repeat Step 1 ~ Step 2 until necessary APAX-5002 backplanes are all attached
on the DIN rail.
Note!
When the total number of APAX-5520 and APAX-5000 I/O modules is
odd, you can use APAX-5001 (1-slot backplane) as the last backplane in
the system. And the procedure to attach APAX-5001 on the DIN rail is
similar as APAX-5002.
4.
Move all backplanes to stack them together. Then slide the backplane locks on
the backplanes to fasten all backplanes. (Similar to Step 6 and 7 in section
1.7.1)
5.
Slide the DIN rail lock of all backplanes into the position, to fix all backplanes to
the DIN rail.
6.
Insert all necessary APAX-5000 I/O modules to the backplanes. (Similar to Step
2, Step 4 and Step 8 in section 1.7.1)
7.
Slide the module lock of those APAX-5000 I/O modules into the position, to fix
these modules to related backplanes. (Similar to Step 3, Step 5 and Step 9 in
section 1.7.1)
19
APAX-5000 I/O Series User Manual
Hide quick links:
Advertisement
Table of Contents
