Advantech APAX-5013 User Manual page 65

Warning! When you connect DO channel with inductive load, we suggest adding
one diode in the circuit to protect the APAX-5060PE module. (Refer to
figure below)
APAX-5060PE Specifications
Relay Output

Channels: 12

Relay Type: Form A (SPST)

Switching Capacity and Lifetime of the Contact (For Resistive Load)
– VDE: 30,000 operations (5 A @ 250 VAC, 10 operations/minute at 8 C)
70,000 operations (5 A @ 30 VDC, 10 operations/ minute at 85 C)
– UL: 60,000 operations (5 A @ 250 VAC)
100,000 operations (5 A @ 30 VDC)
– Mechanism: 20,000,000 operations (no load, 300 operations/minute)

Breakdown Voltage: 500 VAC (50/60 Hz)

Contact Resistance: 30 m (maximum)

Insulation Resistance: 1 G (minimum) at 500 VDC

Operating Time: 10 ms maximum at rated voltage (excluding bounce time)

Release Time: 5 ms maximum at rated voltage (excluding bounce time)
Protection

Isolation: 2,500 VDC (Between channels and backplane bus)

Fail Safe Protection*
* When I/O module lose its communication with controller or coupler, the output chan-
nel will generate a pre-defined value
Environment

Operating Temperature: -20 ~ 70C (when mounted vertically)

Storage Temperature: -40 ~ 85C

Relative Humidity: 5 ~ 95% (non-condensing)
General
57 APAX-5000 I/O Series User Manual