Advantech APAX-5013 User Manual page 45

Note! To keep measurement accuracy please short the channels that
are not in use.
Technical Specifications of APAX-5017PE

Channels: 12 (Differential)

Input Impedance: >10 M (Voltage)

Input Type: V, mV, mA (for current mode, 120 resistors is required to be
connected in parallel)

Voltage/Current Range:
±150mV,±500mV,±1V,±5V,±10V,±20mA,0~20mA,4~20 mA

Configure Different Range for Each Channel: Yes

Accuracy: ±0.1% or better (Voltage), ±0.2% or better (Current) at 25 C

Resolution:
Voltage
Range Resolution
±150 mV 16 bit
±500 mV 16 bit
±1 V 16 bit
±5 V 16 bit
±10 V 16 bit
Current
Range Resolution
±20 mA 15 bit
0 ~ 20 mA 14 bit
4 ~ 20 mA 14 bit

Sampling Rate: 12 samples/second (total)

CMR @ 50/60 Hz: 90 dB

NMR @ 50/60 Hz: 67 dB

Noise Suppression for Frequency: 50/60 Hz

Span Drift: ±30 ppm/ C
Zero Drift: ±6 V/ C


Input Characteristic Curve: According to IEC 61131-2

Common Mode Voltage: up to 200 VDC

Wire Burnout Detection: Only for 4 ~ 20 mA range
Protection

Isolation: 2,500 VDC (Between channels and backplane bus)

Over Voltage Protection: ±35 VDC
37 APAX-5000 I/O User Manual