Duplo DocuCutter DC-545 Service Training Manual page 17

In the service mode, this button is used to enter
various service menus.
The COVER Lamp blinks when the front cover, rear
cover, or the waste cover is open.
The JAM Lamp blinks when a paper jam has
occurred.
16
DocuCutter 545
[INPUT]
[SELECT] Manual job selection (as opposed to
BARCODE Used to toggle barcode mode on/off. When
In the HC configuration (AF-100 autofeeder attached)
the PAPER Lamp blinks when paper runs out.
DocuCutter 545 Training Guide
Programming mode
automatic job recall via a bar code)
the values is changed the REG mark and
autocut features are enabled.
© 2002, Duplo USA Corporation