Flexible Mount With Iec C14 Power Junction Box - Cisco CDB-8U Installation Manual

Switch Installation
Step 9 Secure all excess wire in the raceway. Ensure that no exposed conductors are present.
Step 10 Secure junction box cover with screws.
Step 11 Once all wiring is complete, re-energize the supply circuit.
Step 12 Install switches into the mounts and check for proper operation.

Flexible Mount with IEC C14 Power Junction Box

To connect to a power source, follow these steps:
Procedure
Step 1
Plug the IEC C14 power cord into the power connector on the flexible mount.
Step 2 Plug the other end of the power cord into a power source.
Catalyst Digital Building Series Switch Hardware Installation Guide
Flexible Mounting
65