Table of Contents
Advertisement
Switch Installation
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions
Warning
to ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing
the unit in the rack.
Statement 1006
Unit in the above warning statement refers to the rack mount chassis (CDB-MNT-RACK5-C14).
Note
Use the following procedure to install a Catalyst Digital Building Series Switch in a rack.
Catalyst Digital Building Series Switch Hardware Installation Guide
Rack Mounting
67
Advertisement
Table of Contents
