Inspection And Disassembly - Suzuki GSX-R1000 2007 Service Manual

8-34 CHASSIS
• Remove the dust seal cover , dust seal , steering stem
upper bearing inner race  and bearing .

INSPECTION AND DISASSEMBLY

Inspect the removed parts for the following abnormalities.
* Handlebar distortion
* Race wear and brinelling
* Bearing wear or damage
* Abnormal noise of bearing
If any abnormal points are found, replace defective parts with
new ones.
• Remove the steering stem lower bearing inner race with a
chisel.
The removed bearing inner race must be replaced with
a new one.
• Drive out the steering stem bearing outer races (upper and
lower) using the steel rod.
The removed bearing outer race must be replaced with
a new one.