Suzuki GSX-R1000 2007 Service Manual page 139

• Install the starter clutch cover and tighten the bolts.
NOTE:
* Fit a new gasket washer to the bolt $.
Use a new gasket washer to prevent oil leakage.
" Starter clutch cover bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Install the starter idle gear No.1 shaft
bearing , starter idle gear No.1
washer .
• Install the dowel pins and new gasket
Use a new gasket to prevent oil leakage.
• Install the starter idle gear cover and tighten its bolts to the
specified torque.
" Starter idle gear cover bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
NOTE:
Fit a new gasket washer to the bolt %.
Use a new gasket washer to prevent oil leakage.
, thrust washer
, washer , and spring
.
,
ENGINE 3-89