Reassembly - Suzuki GSX-R1000 2007 Service Manual

REASSEMBLY

Reassemble the swingarm in the reverse order of disassembly and removal.
Pay attention to the following points:
(g)
115 N·m (11.5 kgf-m, 83.0 lb-ft)
(a)
50 N·m (5.0 kgf-m, 36.0 lb-ft)
(b)
50 N·m (5.0 kgf-m, 36.0 lb-ft)
(c)
98 N·m (9.8 kgf-m, 71.0 lb-ft)
(d)
78 N·m (7.8 kgf-m, 56.5 lb-ft)
(e)
98 N·m (9.8 kgf-m, 71.0 lb-ft)
(f)
1 mm (0.04 in)
1 mm
(0.04 in)
(h)
100 N·m (10.0 kgf-m, 72.5 lb-ft)
(g)
65 N·m (6.5 kgf-m, 47.0 lb-ft)
(h)
65 N·m (6.5 kgf-m, 47.0 lb-ft)
(i)
90 N·m (9.0 kgf-m, 65.0 lb-ft) NOTE:
(j)
15 N·m (1.5 kgf-m, 11.0 lb-ft)
(k)
Left
1 mm (0.04 in)
0.5 mm
0.5 mm
(0.02 in)
(0.02 in)
(i)
Apply SUZUKI SUPER
GREASE "A" or equiva-
lent one to the bearings,
washers and dust seals.
When installing the bearing,
stamped mark on the bearing
must face outside.
CHASSIS 8-61
Right
(a)
(b)
(d)
(c)
(e)
1 mm
(0.04 in)
(f)
(k)
(j)