Throttle Body Installation - Suzuki GSX-R1000 2007 Service Manual

5-22 FUEL SYSTEM AND THROTTLE BODY

THROTTLE BODY INSTALLATION

Installation is in the reverse order of removal. Pay attention to
the following points:
• Connect the fuel injector couplers to the fuel injectors. Make
sure that each coupler is installed in the correct position. The
color on each lead wire refers to the appropriate fuel injector.
Primary injector
#1 Y/R and Gr/W
#2 Y/R and Gr/B
#3 Y/R and Gr/Y
#4 Y/R and Gr/R
• Connect the throttle pulling cable
cable to the throttle cable drum.
• Loosen each throttle cable lock-nut.
• Turn in each throttle cable adjuster fully and locate each outer
cable so that the clearance is 0 mm (0 in).
• Tighten each lock-nut.
• Adjust the throttle cable play. ( 2-15)
Secondary injector
Y/R and Lg
Y/R and Lg/W
Y/R and Lg/G
Y/R and Lg/Bl
and throttle returning
0 mm (0 in)
0 mm (0 in)