Fcoe Fcmap - HP 6125XLG Command Reference Manual

Parameters
priority: FCF priority for the VFC interface, in the range of 0 to 255. The smaller the value, the higher the
priority.
Usage guidelines
The VFC interface FCF priority is used in the fcf priority field in an unsolicited Discovery Advertisement.
An ENode selects the FCF switch with the highest priority from the FCF switches sending Discovery
Advertisements and sends a FLOGI request to it for login.
This command is effective only for VFC interfaces in F mode. You can configure this command on VFC
interfaces in E mode, but it does not take effect.
Examples
# Configure the FCF priority as 12 for interface VFC 1.
<Sysname> system-view
[Sysname] interface vfc 1
[Sysname-Vfc1] fcoe fcf-priority 12

fcoe fcmap

Use fcoe fcmap to configure an FC-MAP value.
Use undo fcoe fcmap to restore the default.
Syntax
fcoe fcmap fc-map
undo fcoe fcmap
Default
The default setting is 0x0EFC00.
Views
System view
Predefined user roles
network-admin
Parameters
fc-map: FC-MAP value in the range of 0x0EFC00 to 0x0EFCFF.
Usage guidelines
The FC-MAP value is used to identify an FCoE network. Switches in the same FCoE network must have the
same FC-MAP value.
After FC-MAP values are configured, VFC interfaces perform an FIP renegotiation.
Examples
# Configure the FC-MAP value as 0x0EFCFF.
<Sysname> system-view
[Sysname] fcoe fcmap 0efcff
Changing the FC-MAP will flap all VFC interfaces. Continue? [Y/N]:
10