Parameters
src-name: Name of the source zone set to be copied, a case-sensitive string of 1 to 64 characters. A
source zone set name can contain English letters (uppercase and lowercase), numbers, and special
characters dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with an English
letter.
dest-name: Name of the destination zone set, a case-sensitive string of 1 to 64 characters. A destination
zone set name can contain English letters (uppercase and lowercase), numbers, and special characters
dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with an English letter.
Examples
# Create zone set zs1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zoneset name zs1
[Sysname-vsan1-zoneset-zs1] quit
# Create zone set zs1 by copying zone set zs2.
[Sysname-vsan1] zoneset clone zs1 zs2
Related commands
•
display zoneset
zoneset name
•
zoneset distribute
Use zoneset distribute to trigger a complete distribution, distributing both the active zone set and zone
database.
Syntax
zoneset distribute
Views
VSAN view
Predefined user roles
network-admin
Usage guidelines
After activating a zone set as the active zone set by using the zoneset activate command, you can modify
the database configuration. With the zoneset distribute command, you can distribute the active zone set
and the modified database to the entire fabric without changing the active zone set.
Examples
# Trigger a complete distribution.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zoneset distribute
77