Operator Parameters - KEB COMBIVERT F5 Instructions For Use Manual

5 Operator parameters

Name:
Index:
Subindex:
Meaning:
Data length:
Coding:
Value range:
Note:
Name:
Index:
Meaning:
Subindex:
Data length:
Coding:
Standard value:
Name:
Index:
Meaning:
Subindex:
Data length:
Coding:
Standard value:
Note:
Com_Cycle
1006h
0
Serves for control, whether the synchronous operating mode is active.
The value is coded in *s, but it has an internal resolution of 1 ms.
4 byte
0 = OFF (normal operating mode), otherwise 1 µs.
0, 1000, 2000, 3000, ....., 65000
The content of the 32-Bit-Register 09A0h in the EtherCAT slave control-
ler serves as source for this value.
From software V2.3, the min. setting is 2000 (2ms) at active ExtP-
DMode (FBS Config Bit11 = 1)
Device type
1000h
Displays the device type according to [2]:
0
4 byte
Byte4
Device profile no.
LB
0
Error register
1001h
Displays the actual error state according to [2]:
0
1 byte
Bit7 Bit6 Bit5
Manu- Device
facturer Reserv. profile
spec. spec.
0
This parameter can be read only.
Operator parameters
Byte5 Byte6
Additional information
HB LB
Bit4 Bit3
Com- Tem-
Voltage
munica- pera-
supply
tion ture
Byte7
HB
Bit2 Bit1 Bit0
Error
Current gener-
ally
21