Entering The Provisioning Server - Polycom VVX 201 User Manual

10. Click Save & Continue. A pop-up message appears confirming that the transaction has been
processed (Figure 3-5).

Entering the Provisioning Server

If the Polycom VVX 201 phone was purchased from Nextiva, then the phone will arrive with the
provisioning address already programmed into the phone. If the phone was purchased from a third
party, or if the phone required a factory reset, you will need to manually enter the provisioning
address into the phone. Follow the instructions below to do this.
From the Phone's Menu:
1. Press the Home button on the right side of the phone.
2. Select Settings  Advanced... from the menu.
3. Enter 456 as the password, and press the Enter softkey at the bottom of the screen (Figure
3-6).
NOTE: If the phone does not accept 456 as the password, you will need to contact the
provider with whom this phone last had service to obtain the password, or factory reset the
phone using the instructions found later in this guide.
Figure 3-5: Confirmation Message
Figure 3-6: Enter Password
8 | P a g e
© Nextiva, All Rights Reserved