Polycom VVX 201 User Manual page 29

3. When finished, go on-hook or press the End softkey at the bottom of the screen to
disconnect the call with the party to whom you are speaking (Figure 5-5).
4. To return to the other call, press the Res softkey at the bottom of the screen.
Using the Speakerphone:
1. While on a call, press the Line 2 key on the left side of the screen. The first call is
automatically put on hold.
2. Dial the phone number or extension of the party you want to call, and press the Send
softkey. If you dial the full 10 digit number of the party you want to call, the Polycom VVX
201 phone will automatically start dialing, so pressing the Send softkey is not necessary
(Figure 5-7).
Figure 5-5: End One Line
Figure 5-6: Resume Other Line
Figure 5-7: Dialed Numbers
29 | P a g e
© Nextiva, All Rights Reserved