Polycom VVX 201 User Manual page 42

4. When finished, press the End softkey at the bottom of the screen to disconnect the call
(Figure 5-33).
During a Transfer
1. While on a call, press the Tsfr softkey at the bottom of the screen. The party you were
speaking to is put on hold, and you will hear a dial tone (Figure 5-34).
NOTE: To cancel the transfer and return to the original party, press the Cncl softkey at the bottom of
the screen (Figure 5-35).
2. Press the Dir softkey at the bottom of the screen.
Figure 5-33: End Call
Figure 5-34: Transfer Call
Figure 5-35: Transfer Destination
42 | P a g e
© Nextiva, All Rights Reserved