Mounting An Ex4200 Switch On Two Posts In A Rack Or Cabinet; Figure 30: Attaching Rubber Feet To An Ex4200 Switch Chassis - Juniper EX4200-24T Hardware Manual

EX4200 Switch Hardware Guide
Related
Documentation

Mounting an EX4200 Switch on Two Posts in a Rack or Cabinet

130
Turn the chassis right side up on the desk or the level surface.
3.
If it is an EX4200-24F switch, we recommend you insert dust covers in unused SFP
4.
ports.

Figure 30: Attaching Rubber Feet to an EX4200 Switch Chassis

Connecting AC Power to an EX4200 Switch on page 149
Connecting DC Power to an EX4200 Switch on page 152
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 165
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 168
Clearance Requirements for Airflow and Hardware Maintenance for EX4200 Switches
on page 70
You can mount an EX4200 switch on two posts of a 19-in. rack (either a two-post or a
four-post rack) or a 19-in. cabinet by using the mounting brackets provided with the
switch. (The remainder of this topic uses "rack" to mean "rack or cabinet.")
You can mount the switch on four posts of a four-post rack by using the mounting brackets
provided with the separately orderable four-post rack-mount kit. See
EX4200 Switch on Four Posts in a Rack or Cabinet" on page
NOTE: If you need to mount the switch in a recessed position on either a
two-post rack or a four-post rack, you can use the 2-in.-recess front brackets
provided in the separately orderable four-post rack-mount kit.
Before mounting the switch on two posts in a rack:
"Mounting an
133.
Copyright © 2017, Juniper Networks, Inc.