Table 25: Chassis Viewer For Ex4550 Switches - Juniper EX4200-24T Hardware Manual

Table 24: Chassis Viewer for EX4500 Switches (continued)
Field
LCD panel
Console port
Management ( ) port
me0
USB port
Rear View of the EX4500 Switch
Fan tray
Virtual Chassis port
Power supplies
Intraconnect module
Virtual Chassis module

Table 25: Chassis Viewer for EX4550 Switches

Field
Front View
Copyright © 2017, Juniper Networks, Inc.
Description
LCD panel configured for the LEDs on the ports. Mouse over the icon to view the current character
display.
The console port is used to connect the switch to a management console or to a console server.
The management port is used to connect the switch to a management device for out-of-band
management. Use this port for initial switch configuration.
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks for
your EX Series switch.
Mouse over the fan tray icon to display status of the fans and airflow direction information. For
a Virtual Chassis, the status of the fans of the selected member switch is displayed.
Displayed only when switches are configured as a Virtual Chassis. The colors listed below denote
the Virtual Chassis port (VCP) status:
Green—VCP is up and operational.
Yellow—VCP is up but is nonoperational.
Gray—VCP is down and nonoperational.
Mouse over the power supply icons to display name, status, and description information.
Mouse over the module to display details of the intraconnect module. The intraconnect module
helps the switch achieve line rate on all its ports.
Mouse over to display details of the switches in the Virtual Chassis configuration.
Description
Chapter 5: Viewing System Information
51