Troubleshooting Virtual Chassis Port Connectivity On An Ex4200 Switch; Virtual Chassis Port (Vcp) Connection Does Not Work; Troubleshooting Power Supply Installation Alarms On Ex4200 Switches - Juniper EX4200-24T Hardware Manual

EX4200 Switch Hardware Guide

Troubleshooting Virtual Chassis Port Connectivity on an EX4200 Switch

Virtual Chassis port (VCP) connection does not work

Problem
Cause
Solution
Related
Documentation

Troubleshooting Power Supply Installation Alarms on EX4200 Switches

238
Configuring Gigabit Ethernet Interfaces (J-Web Procedure)
Removing a Transceiver on page 195
Uplink Modules in EX4200 Switches on page 18
EX Series Switches Interfaces Overview
This topic provides troubleshooting information for specific problems related to uplink
module ports on EX4200 switches.
Virtual Chassis port (VCP) connection does not work on page 238
1.
Description: The Virtual Chassis port (VCP) connection configured in an EX4200 switch
does not work.
Environment: A port of the uplink module is set as a VCP.
The uplink module installed in the switch was replaced.
Set a port in the uplink module as a VCP. See Setting an Uplink Port on an EX Series Switch
as a Virtual Chassis Port (CLI Procedure).
Monitoring Interface Status and Traffic
Configuring Gigabit Ethernet Interfaces (CLI Procedure)
Configuring Gigabit Ethernet Interfaces (J-Web Procedure)
Installing an Uplink Module in an EX4200 Switch on page 187
Removing a Transceiver on page 195
Uplink Modules in EX4200 Switches on page 18
Understanding EX4200, EX4500, and EX4550 Virtual Chassis Hardware Configurations
on page 111
This topic provides troubleshooting information for problems related to power supply
installation on EX4200 switches.
The Switch Displays the "Unsupported PSU" Alarm on page 239
Copyright © 2017, Juniper Networks, Inc.