Table 29: Chassis Viewer For Ex8216 Switches; Table 30: Chassis Viewer For Xre200 External Routing Engines - Juniper EX4200-24T Hardware Manual

EX4200 Switch Hardware Guide

Table 29: Chassis Viewer for EX8216 Switches

Field Description
Front View
Interface status In the image, click any line card or RE module to display the front view of the selected component.
In the image, the colors listed below denote the interface status:
Mouse over the interface (port) to view more information.
You can view status for the following ports on the RE module:
Slot numbers Slots on the switch are labeled, from the top of the switch down:
Temperature The active slots contain a gray temperature icon. Mouse over the icon to display temperature
information for the slot.
Fan status Mouse over the fan tray icon to display consolidated information about the fans.
Power supplies Mouse over the power supply icons to display name, status, and description information.
LCD panel LCD panel configured for the LEDs on the ports. Mouse over the icon to view the current character
display.
Rear View
SF modules Mouse over the SF module icons in their respective slots to display information. Slots are numbered
SF7–SF0, from left to right.

Table 30: Chassis Viewer for XRE200 External Routing Engines

Field
Front View
56
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
USB port—Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks for your
EX Series switch.
Auxiliary port—This port is unavailable.
Management ( ) port—The management port is used to connect the switch to a management
me0
device for out-of-band management.
Console port—The console port is used to connect the switch to a management console or to a
console server. (You might do this for initial switch configuration.)
RE0 (RE module)
RE1 (RE module)
0–15 (line cards)
Description
Copyright © 2017, Juniper Networks, Inc.