Juniper EX4200-24T Hardware Manual page 30

EX4200 Switch Hardware Guide
Table 4: CLI Equivalents of Terms Used in Documentation for EX4200 Switches (continued)
Hardware Item (CLI) Description (CLI)
PIC (n) Abbreviated name of
the Physical Interface
Card (PIC).
One of the following:
One of the following:
Xcvr (n) Abbreviated name of
the transceiver
Power supply (n) One of the following:
Fan tray Fan tray
Related
Documentation
8
Value (CLI)
n is a value in the range
of 0–1.
PIC 0
24x 10/100/1000
Base-T
24x 100
Base-FX/1000
Base-X
48x 10/100/1000
Base-T
PIC 1
2x 10GE SFP+
4x GE SFP
2x 10GE XFP
n is a value equivalent
to the number of the
port in which the
transceiver is installed.
n is a value in the range
of 0–1. The value
PS 320W AC
corresponds to the
power supply slot
PS 600W AC
number.
PS 930W AC
PS 190W DC
–
EX4200 Switches Hardware Overview on page 3
Item in Additional
Documentation Information
The switch does not Understanding Interface
have actual PIC Naming Conventions on
devices; see entries for EX Series Switches
PIC 0 through PIC 1 for
the equivalent item on
the switch.
Built-in network ports "Front Panel of an
on the front panel of EX4200 Switch" on
the switch page 11
Uplink module "Uplink Modules in
installed on the front EX4200 Switches" on
panel of the switch page 18
Optical transceivers "Pluggable
Transceivers
Supported on EX4200
Switches" on page 79
AC or DC power supply "Power Supply in
EX4200 Switches" on
page 33
Fan tray "Cooling System and
Airflow in an EX4200
Switch" on page 31
Copyright © 2017, Juniper Networks, Inc.