Mounting An Ex2200 Switch On Two Posts Of A Rack Or Cabinet; Figure 23: Securing The Ex2200-C Switch Using Security Slots - Juniper EX2200 Hardware Manual

EX2200 and EX2200-C Switches Hardware Guide
Related
Documentation

Mounting an EX2200 Switch on Two Posts of a Rack or Cabinet

94

Figure 23: Securing the EX2200-C Switch Using Security Slots

Security slot
Security cable
Connecting AC Power to an EX2200 Switch on page 121
Connecting DC Power to an EX2200 Switch on page 123
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 137
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 140
Clearance Requirements for Airflow and Hardware Maintenance for EX2200 Switches
on page 57
You can mount all EX2200 switches on two posts of a two-post or a four-post 19-in. rack
or cabinet using the mounting brackets and screws provided with all EX2200 switches
except the EX2200-C switches. For EX2200-C switches, mounting brackets and screws
are separately orderable. (The remainder of this topic uses rack to mean rack or cabinet.)
NOTE: If you need to mount an EX2200 switch except the EX2200-C switch
models in a recessed position on either a two-post rack or a four-post rack,
you can use the 2-in.-recess front mount brackets provided in the separately
orderable four-post rack-mount kit. EX2200-C cannot be mounted in a
recessed position.
NOTE: Do not block the vents on the top of the EX2200-C switches. Doing
this can lead to overheating of the switch chassis.
Before mounting the switch on two posts of a two-post or a four-post rack:
Copyright © 2017, Juniper Networks, Inc.