Address Binding - Dell PowerConnect 2808 User Manual

Deleting Static Hosts
1 Open the Static Hosts page.
2 Click Show All.
The Static Hosts Table page opens.
3 Check the Remove checkbox next to a static host.
4 Click Apply Changes. The host is deleted, and the device is updated.

Address Binding

The Address Binding page displays a list of the DHCP server's allocated IP addresses and each IP
address's client identifier, lease expiration time, and allocation type. Open the Address Binding page,
click System DHCP Server

Figure 6-31. Address Binding
IP Address — Displays the IP addresses of the clients whose bindings are displayed.
•
• Client Identifier — A unique identification of the client specified in dotted hexadecimal notation,
e.g., 01b6.0819.6811.72.
• Lease Expiration — Displays the lease expiration date and time of the host's IP address.
• Type — Displays the manner in which the IP address was assigned to the host:
– Static allocation — The network administrator maps the hardware address of a host to an IP
address on the DHCP server.
– Permanent allocation — An IP address received through a standard request-reply mechanism is
owned by a client permanently
– Dynamic allocation — A network device obtains a leased IP address for a specified period of time.
The IP address is revoked at the end of this period and the switch must request another IP address.
Address Binding in the tree view.

Dell PowerConnect 28xx Systems User Guide
91