PCBS
3.8 PCBS
3.8.1 REPLACING THE PSU
[A]
1. Remove the rear cover. (☛ 3.1.3)
2. Lift the PSU [B] out of the machine (! x 5, " x 4, 1 grounding wire [A]).
!
CAUTION
When removing the PSU, make sure to first turn off the main power and
unplug the power cord. This is done to eliminate the risk of electrical
shock.
[B]
H310R951.WMF
3-34
14 June, 2002