Positioning Accuracy Of The Sensor Chip - Basler A202K Manual

Mechanical Considerations

5.4 Positioning Accuracy of the Sensor Chip

Positioning accuracy of the sensor chip in the horizontal and vertical direction is ± 0.4 mm.
Rotational positioning accuracy is as shown in Figure 5-4. Reference position is the center of the
camera housing.
Since the translatory and rotational positioning tolerance depend on each other, the worse case
of maximum rotational and horizontal/vertical mis-positioning can not occur at the same time.
± 0.1°
Figure 5-4: Rotational Positioning Accuracy
5-4
DRAFT
Drawings are not to scale
k
BASLER A202