Performance Specifications - Basler A202K Manual

Introduction

1.2 Performance Specifications

Category
Sensor
Pixels
Pixel Size
Spectral Response
Photo Response Non-uniformity
Dark Signal Non-uniformity
Pixel Clock Speed
Max. Frame Rate
Video Output Type
Video Output Formats
Synchronization
Exposure Time Control
Gain and Offset
Power Requirements
Lens Adapters
Housing Size (L x W x H)
Weight
Conformity
Table 1-1: A202
1-2
DRAFT
Specification
Interline Transfer Progressive Scan CCD Sensor
1004 (H) x 1004 (V)
7.4 µm x 7.4 µm
See Figure 1-1
± 5% (typical)
± 1 gray value (typical)
40 MHz
(20 MHz when horizontal or full binning is used)
48 Frames/sec. at full resolution
Camera Link LVDS
(RS-644 when used with the optional Basler Interface Controller)
Dual 8 Bit or Dual 10 Bit
Via external ExSync signal or free-run
Level-controlled, programmable, or free-run
Programmable via an RS-644 serial connection on the frame
grabber
12 VDC (± 10%), max. 5.5 W, < 1% ripple
C-mount or F-mount
without lens adapter:
with C-mount adapter:
with F-mount adapter:
without lens adapter:
with C-mount adapter:
with F-mount adapter:
CE, FCC
Performance Specifications
k
37.6 mm x 62 mm x 62 mm
40.1 mm x 62 mm x 62 mm
69.1 mm x 62 mm x 62 mm
~ 180 g.
~ 220 g.
~ 290 g.
k
BASLER A202