Advertisement
Available languages
Available languages
Figure 12 Connection diagram
1 USB Box
2 Controller
Table 7 Internet and Modbus TCP/IP connections combinations
Internet
Modbus TCP/IP
Startup
Connect the power cord to an electrical outlet with protective earth ground or set the circuit breaker
for the controller to on.
Operation
Use the MSM software to interact with the connected measurement devices. Contact Hach Technical
Support to get a Claros Mobile Sensor Management account for the first time.
Note: Refer to the manufacturer's website to find more information about the MSM software.
1. Open an internet browser, then enter the correct URL:
• US: https://us.fsn.hach.com
• EU: https://eu.fsn.hach.com
2. Enter login information to:
• Receive the status and measurement information about measurement devices.
• Configure and calibrate measurement devices.
• Get access to interactive, step-by-step maintenance guides.
Maintenance
Do not disassemble the instrument for maintenance. If the internal components must be cleaned or repaired,
contact the manufacturer.
20 English
3 PLC system
LAN (M12 socket)
X
X
N O T I C E
USB Box
WiFi
Modem
X
X
X
—
Advertisement
