Hach EC1000 Instruction Manual page 125

OPTION MENU ITEM
MODE (AL1)
SET PNT (AL1)
ALARM 1 (AL)
HYST (AL1)
DLY TIME (AL1)
MODE (AL2)
SET PNT (AL2)
ALARM 2 (AL)
HYST (AL2)
DLY TIME (AL2)
Mode (rEC)
MINIMUM (rEC)
WINDOW (rEC)
MAXIMUM (rEC)
ZERO TRIM (rEC)
OUT TRIM (rEC)
FS TRIM (rEC)
MODE (Con)
SET PNT (Con)
DEAD BND (Con)
PRESET (Con)
GAIN (Con)
RESET (Con)
RATE (Con)
MODE (Cur)
TITR CUR (Con)
POINTS (Cur)
ZERO TRIM (Con)
OUT TRIM (Con)
FS TRIM (Con)
© 1997, Hach Company All Rights Reserved
EC 1000 pH / ORP QUICK REFERENCE GUIDE
SETUP KEY MENU
DESCRIPTION
ALARM OPTIONS
Alarm 1 mode (pH high/low, mV high/low, temperature high/low)
Alarm 1 setpoint for pH (-2.00 to +16.00 PH), mV (-2000.0 to +2000.0 MV) and temperature (-5.00 to +105 °C)
Alarm 1 Hysteresis for pH (+0.01 to +2.00 PH), mV (+1.0 to +100.0 MV) and temperature (+0.1 to +2.0 °C)
Alarm 1 delay time (0 to 30 SECS)
Alarm 2 mode (pH high/low, mV high/low, temperature high/low)
Alarm 2 setpoint for pH (-2.00 to +16.00 PH), mV (-2000.0 to +2000.0 MV) and temperature (-5.00 to +105 °C)
Alarm 2 Hysteresis for pH (+0.01 to +2.00 PH), mV (+1.0 to +100.0 MV) and temperature (+0.1 to +2.0 °C)
Alarm 2 delay time (0 to 30 SECS)
RECORDER OPTIONS
Recorder output mode (pH, mV, temperature)
Recorder lower limit in terms of pH (-2.00 to +16.00 PH), mV (-2000.0 to +2000.0 MV) and temperature (-5.00 to +100 °C)
Recorder upper limit in terms of pH (-2.00 to +16.00 PH), mV (-2000.0 to +2000.0 MV) and temperature (-5.00 to +100 °C)
Trim recorder zero (in terms of mA output)
Trim recorder full scale (in terms of mA output)
CONTROL OPTIONS (see INIT SET OUTPUT 2)
Controller mode (pH/mV)
Controller setpoint for pH (-2.00 to +16.00 PH), mV (-2000.0 to +2000.0 MV)
Controller dead band for pH (+0.00 to +2.00 PH), mV (000.0 to +100.0 MV)
Preset output for controller (0.0 to 100%)
Controller gain (0.00 to 99.99)
Controller reset action (0.00 to 99.99/HR)
Controller rate action (00.00 to 99.99 MIN)
Titration curve type (LINEAR+, LINEAR-, CURVE)
Data point entry for titration curve
Trim controller zero (in terms of mA output)
Trim controller full scale (in terms of mA output)
48275-44
10-25-94 1ED