Hach EC1000 Instruction Manual page 34

Press .
ENTER
Press to choose the temperature compensation mode (automatic [AUTO TC] or
ENTER
manual [MAN TC]).
AUTOmatic Temperature Compensation is the default. If MANual Temperature
Compensation is chosen, press the
Press .
ENTER
Press . The current SET PoiNT appears on the display.
ENTER
Change the SET PoiNT (Range -5.0 to 105.0 °C) by pressing the
followed by the
DOWN ARROW
Press to save the value and advance to:
ENTER
Press .
ENTER
Press . The current SOLution Temperature Compensation appears on the display.
ENTER
Change the SOLution TC (Range: -0.100 pH to +0.100 pH) by pressing the
key followed by the
DOWN ARROW
Press , and then the
ENTER CLEAR
submenu.
Press .
ENTER
Press .
ENTER
Toggle between baud rates (300, 600, 1200, 2400, 4800, 9600) by pressing the
key or the
ARROW UP ARROW
Press when the desired rate is selected.
ENTER
Press . The PARITY menu is ODD, EVEN or NONE (default is NONE).
ENTER
Change the display by pressing the
or the key.
UP ARROW
key or the
DOWN ARROW
key or the key
UP ARROW
key or the
UP ARROW
key to proceed to the SERIAL interface
DOWN ARROW
key.
key followed by the
RIGHT ARROW
34
key to toggle to:
UP ARROW
key
RIGHT ARROW
.
RIGHT ARROW
key.
DOWN
DOWN ARROW
key