Hach EC1000 Instruction Manual page 48

Code
A2S <=(-2 to 16 for pH,
±2000 for mV,
-5.0 to 105.0 for temp)>
A2H <=(0.01 to 2 for pH,
1 to 100 for mV, 0.1 to 2
for temp)>
A2D <=(0 to 30)>
ALO
RWN
CWN
LST
PIV <=(0 to 99)>
Table 6 RS-232 Remote Commands (continued)
Function
ALARMS (continued)
Recall or set alarm 2 setpoint for current alarm type
Recall or set alarm hysteresis for current alarm mode
Recall or set alarm 2 delay time
Toggles alarm lockout status and responses with the
new status
Recall system warnings
Clears system warning
PRINTER
List Setup
Recall or set print interval
48
Response
Value (on recall); OK (on set)
Value (on recall); OK (on set)
Value (on recall); OK (on set)
Locked or Unlocked
Print warnings followed by OK
OK
Print Setup
Value (on recall); OK (on set)