Routed Pppoa - THOMSON SpeedTouch 605 User Manual

Chapter 5
Expert Configuration

5.4.3 Routed PPPoA

Introduction
Creating a Routed
PPPoA connection
Additional configuration
140
The Routed PPPoA configuration page allows you to add new Routed PPPoA
connection entries or to change settings of existing entries.
To add a Routed PPPoA connection entry:
Click New.
1
entry
In the Interface box, type a unique interface name (different from the MER
2
interface name).
In the Destination list, click the appropriate Routed Ethernet destination
3
indicated by the Routed Ethernet interface name
Type user name and password for the account at the ISP [optional].
4
Click Apply.
5
Once created, per Routed PPPoA connection, additional configuration is possible by
clicking:
Routing
Other
These parameters can only be modified when the link is down. Take the link
down first by clicking Hang-up.
Routing
Following fields are available:
Destination:
Controls the networks that can be reached via this particular PPP connection.
Specify the remote host or network in prefix notation. e.g. 172.16.0.0/16.
Label:
Allows you to assign a label to this connection.
E-DOC-CTC-20050429-0104 v1.0