Speedtouch™610 Command Line Interface - THOMSON SpeedTouch 610 Operation And Maintenance Manual

7 SpeedTouch™610 Command Line Interface
SpeedTouch™610 CLI
access
CLI web page access
requirements
CLI Telnet access
requirements
CLI serial access
requirements
E-SIT-CTC-20030324-0002 v1.0
Users can access the Command Line Interface via:
• The SpeedTouch™610 CLI web pages
•
A Telnet session
• The serial Console interface.
For accessing the CLI via the SpeedTouch™610 web pages:
•
TCP/IP connectivity must exist between the computer and the SpeedTouch™610.
• A web browser must be installed on the computer.
The web browser should be at least Microsoft's Internet Explorer 4.0, or at least
Netscape's Communicator 4.06, or equivalent.
• The web browser must support Java Script.
For accessing the CLI via an IP Telnet session:
•
TCP/IP connectivity must exist between the computer and the SpeedTouch™610.
•
A Telnet application must be available on the computer.
All popular, recent Operating Systems feature a built-in telnet application.
Note
For accessing the CLI via the serial Console port:
•
A null modem cable
• An application that you can use to connect to other devices, using either your
modem or a null modem cable, for example Hilgraeve's Hyperterminal application
delivered with MS Windows OSs.
•
The application's Port settings should be set for:
•
9600 bits per second
•
8 data bits
•
No parity
•
One stop bit
•
No Flow control
•
ANSI terminal emulation.
7 SpeedTouch™610 Command Line Interface
51