Pair A Heart Rate Sensor With Your M430; Pair A Stride Sensor With Your M430; Pair Polar Balance Scale With Your M430 - Polar Electro M430 User Manual

the mobile device. The pairing starts.
5. Pairing completed is displayed when you are done.

PAIR A HEART RATE SENSOR WITH YOUR M430

When you're wearing a Polar heart rate sensor that's paired with your M430, the M430 does not measure
heart rate from the wrist.
There are two ways to pair a heart rate sensor with your M430:
1. Wear the moistened heart rate sensor.
2. On M430, go to General Settings > Pair and sync
> Pair other device and press START.
3. M430 starts searching for your heart rate sensor.
4. Once the heart rate sensor is found, the device ID
Polar H10 xxxxxxxx is displayed.
5. Press START, Pairing is displayed.
6. Pairing completed is displayed when you are
done.
OR
1. Wear the moistened heart rate sensor.
2. On M430, press START in time view to enter pre-
training mode.
3. Touch your heart rate sensor with M430, and wait
for it to be found.
4. The device ID Pair Polar H10 xxxxxxxx is dis-
played. Choose Yes.
5. Pairing completed is shown when you are done.

PAIR A STRIDE SENSOR WITH YOUR M430

See this support document

PAIR POLAR BALANCE SCALE WITH YOUR M430

There are two ways to pair a Polar Balance scale with your M430:
1. Step on the scale. The display shows your weight.
2. After a beep sound, the Bluetooth icon on the scale display starts flashing, which means that the con-
nection is now on. The scale is ready to be paired with your M430.
3. Press and hold the BACK button for 2 seconds on your M430 and wait until the display indicates the
pairing is complete.
for instructions on how to pair and calibrate a stride sensor.
20