Delete A Pairing - Polar Electro M430 User Manual

or
1. Go to General Settings > Pair and sync > Pair other device and press START.
2. M430 starts searching for your scale.
3. Step on the scale. The display shows your weight.
4. Once the scale is found, the device ID Polar scale xxxxxxxx is displayed on your M430.
5. Press START, Pairing is displayed.
6. Pairing completed is shown when you are done.
The scale can be paired with 7 different Polar devices. When the number of paired devices exceeds 7, the
first pairing will be removed and replaced.

DELETE A PAIRING

To delete a pairing with a sensor or mobile device:
1. Go to Settings > General settings > Pair and sync > Paired devices and press START.
2. Choose the device you want to remove from the list and press START.
3. Delete pairing? is displayed, choose Yes and press START.
4. Pairing deleted is displayed when you are done.
21