6-2
Power OFF
This section provides Power OFF details.
Before following power OFF procedures below, check that the IPC RTOS Controller is ON by examin-
ing the LED indicators on the Box PC.
6-2-1
Power OFF Using the Operating System Shut Down
1
Ensure all programs are closed.
If required close all active programs.
2
Select Shut down of the Operating System.
The Box PC will shut down.
3
Wait until the PWR LED is OFF.
The Box PC is powered OFF.
6-2-2
Power OFF Using the Power Button
1
Ensure all programs are closed.
If required close all active programs.
2
Press and release the power button on the IPC RTOS Controller within 1 second.
The IPC RTOS Controller will shutdown.
Note that this behaviour of can be reconfigured with the Power Options settings.
Refer to 2-3 Power Button on page 2-7 for power button location information.
3
Wait until the PWR LED is OFF.
The Box PC is powered OFF.
Additional Information
The Box PC will restart automatically if a UPS is connected to the I/O connector of the Box PC.
Use the Power button of the UPS or remove the input power from the UPS for a normal shut-
down of the Box PC.
NY-series IPC RTOS Controller Hardware User's Manual (W581)
6 Operating Procedures
6
6-3