Yealink VC400 User Manual page 95

To configure Far-end Camera Control via the remote control:
Press (Menu soft key) to enter main menu.
1.
Press or to select the Video & Audio menu.
2.
Press or to scroll to Far-end Camera Control, and then press
3.
Press or to scroll to Far Control of Camera, and then press
4.
disable this feature.
Press or to scroll to Far Set of Camera Presets, and then press
5.
disable this feature.
If you enable this feature, and the remote system completes adjusting local camera, it can
save the presets of the local camera.
Press or to scroll to Far Move to Near Camera Presets, and then press
6.
enable or disable this feature.
If you enable this feature, the remote system can use the saved presets of the local camera
during a call.
Press (Save soft key) to accept the change.
7.
Far-end Camera Control is configurable via web user interface at the path Setting->Video &
Audio->Far Control Near Camera/Far Set of Camera Presets/Far Move to Camera Presets.
Customizing the VC400 Video Conferencing System
.
to enable or
to enable or
to
83