Yealink VC400 User Manual page 129

Select the Enabled from the pull-down list of Recording.
2.
Click Confirm to accept the change.
3.
To record video when the system is idle via the remote control:
Press to start recording and then
1.
To record video during a call via the remote control:
Do one of the following:
1.
- Long press
- Press (More soft key) to open More screen.
Press or
Open the More screen, scroll to USB Recording again, and then press
recording.
To record video during a call via the video conferencing phone:
Press the Start REC soft key to start recording and press the Stop REC soft key again to
1.
stop recording.
to start recording and long press
to scroll to USB Recording, and then press
Using the VC400 Video Conferencing System
again to stop recording.
again to stop recording.
to start recording.
to stop
117