Yealink VC400 User Manual page 130

User Guide for the VC400 Video Conferencing System
When you start recording, the display device will show
stop recording, the recording icon disappears from the screen. The display device prompts
"Successfully video recording!"
If you start recording during a call, both your display device and remote display devices will show
Note
the icon on your video image.
To view recorded video via the remote control:
Insert the USB flash drive with the recorded video to the VC400 codec.
Press
1.
Press or
2.
Press or
3.
Press or
4.
Press
5.
You can do the following:
- To pause the video, press
on the LCD TV screen.
Press
- To skip forward the video, press
- To rewind the video, press
- To adjust the volume of the speakerphone, press
- To stop the video, press
When receiving an incoming call while you are playing video, the system will stop playing video
automatically.
To delete recorded video via the remote control:
Press
1.
Press or
2.
Press or
3.
Press or
4.
Press
5.
118
(Menu soft key) to enter main menu.
to select the Record menu.
to scroll to Videos, and then press
to select the desired Video.
or (Play soft key).
(Play soft key) to continue playing video.
. Press once to rewind 8 seconds.
(Stop soft key).
(Menu soft key) to enter main menu.
to select the Record menu.
to scroll to Videos, and then press
to select the desired Video.
(Delete soft key).
and the recording time. When you
.
(Pause soft key). The
. Press once to skip forward 8 seconds.
or
.
(Play soft key) appears
.