Yealink VC400 User Manual page 131

The display device prompts "Delete this video?"
Select OK, and then press
6.
Auto Recording
Auto recording feature is available only when the recording feature is enabled. If it is enabled,
the system will start recording automatically once a call is established. Make sure a USB flash
drive has been inserted to the USB port on the VC400 Codec and the USB feature is enabled.
You can configure auto recording feature via web user interface only.
To configure auto recording feature via web user interface:
Click on Setting->Video & Audio.
1.
Using the VC400 Video Conferencing System
to delete the video.
119