Yealink VC400 User Manual page 126

User Guide for the VC400 Video Conferencing System
stored key.
To save the preset of the camera when the system is idle:
Press
1.
Press the navigation key to adjust the angle of the camera or press
2.
focus of the camera.
Long press any number key (0-9) on the remote control until the screen prompts "Preset
3.
Key 'X' successfully saved" ("X" stands for the saved key).
Current camera position and focus are stored to the numeric key. You can change the
position of the camera and focus to the preset quickly by pressing the saved key during a
call.
Press
4.
To adjust the camera to the preset via the remote control when the system is idle:
Press
1.
Press the numeric key that is already associated with a preset.
2.
The camera will adjust to the preset.
Press
3.
To control local camera via the remote control during a video call:
Press
1.
Press or
2.
Press the navigation key to adjust the angle of the camera or press
3.
focus of the camera.
Long press any numeric key (0-9) to save the current preset position of the camera.
4.
The original preset will be overwritten if you configure a preset for the numeric key that is
already associated with a preset.
Press
5.
To control the local camera during a video call via web user interface, go to the path Home
(Hover your cursor over the registered account, click
pop-up window).
To adjust the camera to the preset via the remote control during a video call:
Press
1.
Press or
2.
Short press the saved key to change camera position and focus to the preset.
3.
Press
4.
If the remote camera enables the far-end camera control feature (For more information, refer to
Far-end Camera Control
more information, refer to your system administrator), you can control the remote camera
during the video call via the remote control.
114
(Preset soft key).
(Exit soft key) to return to the idle screen.
(Preset soft key).
(Exit soft key) to return to the idle screen.
(More soft key) during an active call.
to scroll to Camera Preset, and then press
(Exit soft key) to return to the idle screen.
(More soft key) during an active call.
to scroll to Camera Preset, and then press
(Exit soft key) to return to the idle screen.
on page 82) and corresponding camera control protocol is enabled (For
or
.
or
, and then control the camera in the
.
to adjust the
to adjust the