Yealink VC400 User Manual page 73

Select the desired contact bandwidth from the pull-down list of Bandwidth.
8.
The default contact bandwidth is Auto. The system will select the appropriate bandwidth
automatically.
Press
9.
Note If the contact already exists in the directory, the display device will prompt "Contact already
exists!".
To add a conference contact via the remote control:
Press
1.
Press or
2.
Press
3.
Enter conference name in the Name field.
4.
Press or
5.
Enter a few characters of the contact name or the contact number in the Add Member
6.
field.
Contacts whose name or number matches the characters entered will appear on the
screen.
Press or
7.
Press
8.
Repeat steps 7 to 8 to add more contact to the Member List.
Customizing the VC400 Video Conferencing System
(Save soft key) to save the local contact.
(Call soft key).
to select the Directory menu.
(New Conference soft key).
to scroll to Add Member.
to select the desired local contact.
to add the desired local contact to the Member List.
61