Yealink VC400 User Manual page 38

User Guide for the VC400 Video Conferencing System
Do the following:
Punch holes in the wall and then insert the expansion bolts.
1.
Installation location of the expansion bolts and punching requirement are shown above.
Lock the L-bracket with the M3×8 screws.
2.
Adjust the screws position and manually lock them.
3.
Lock the L-bracket to the wall with T4×30 screws.
4.
Connect one end of the DVI cable to the camera and put the other end of the cable
5.
through the L-bracket.
26