Cfs Distribution Of Allowed Domain Id Lists; Enabling Distribution; Locking The Fabric - Cisco Nexus 5500 Series NX-OS Configuration Manual

Nx-os san
Table of Contents

Advertisement

Domain IDs

CFS Distribution of Allowed Domain ID Lists

You can enable the distribution of the allowed domain ID list configuration information to all Cisco SAN
switches in the fabric using the Cisco Fabric Services (CFS) infrastructure. This feature allows you to
synchronize the configuration across the fabric from the console of a single switch. Because the same
configuration is distributed to the entire VSAN, you can avoid a possible misconfiguration and the possibility
that two switches in the same VSAN have configured incompatible allowed domains.
Use CFS to distribute the allowed domain ID list to ensure consistency in the allowed domain ID lists on all
switches in the VSAN.
Note
We recommend configuring the allowed domain ID list and committing it on the principal switch.
For additional information, refer to Using Cisco Fabric Services in the System Management Configuration
Guide for your device.

Enabling Distribution

You can enable (or disable) allowed domain ID list configuration distribution.
CFS distribution of allowed domain ID lists is disabled by default. You must enable distribution on all switches
to which you want to distribute the allowed domain ID lists.
Procedure
Step 1
Step 2
Step 3

Locking the Fabric

The first action that modifies the existing configuration creates the pending configuration and locks the feature
in the fabric. After you lock the fabric, the following conditions apply:
• No other user can make any configuration changes to this feature.
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
40
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
fcdomain distribute
Example:
switch(config)# fcdomain distribute
no fcdomain distribute
Example:
switch(config)# no fcdomain distribute
Configuring Fibre Channel Domain Parameters
Purpose
Enters global configuration mode.
Enables domain configuration
distribution.
Disables (default) domain configuration
distribution.
OL-30895-01

Advertisement

Table of Contents
loading

Table of Contents