Table of Contents
Advertisement
Discovering SCSI Targets
Step 2
Displaying SCSI LUN Information
Use the show scsi-targetand show fcns databasecommands to display the results of the discovery.
The following example displays the discovered targets:
switch# show scsi-target status
discovery completed
This command takes several minutes to complete, especially if the fabric is large or if several devices are
Note
slow to respond.
The following example displays the FCNS database:
switch# show fcns database
The following example displays the SCSI target disks:
switch# show scsi-target disk
The following example displays the discovered LUNs on all operating systems:
switch# show scsi-target lun os all
The following example displays the port WWN that is assigned to each operating system (Windows, AIX,
Solaris, Linux, or HPUX):
switch# show scsi-target pwwn
OL-30895-01
Command or Action
switch# discover custom-list delete vsan vsan-id
domain domain-id
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
Displaying SCSI LUN Information
Purpose
Deletes the specified domain ID from the
custom list.
201
Advertisement
Table of Contents
