Analyzing The Zone And Zone Set; Default Settings For Zones - Cisco Nexus 5500 Series NX-OS Configuration Manual

Analyzing the Zone and Zone Set

Step 3
Analyzing the Zone and Zone Set
To better manage the zones and zone sets on your switch, you can display zone and zone set information using
the show zone analysis command.
The following example shows how to display full zoning analysis:
switch# show zone analysis vsan 1
The following example shows how to display active zoning analysis:
switch# show zone analysis active vsan 1
See the command reference for your device for the description of the information displayed in the command
output.

Default Settings for Zones

The following table lists the default settings for basic zone parameters.
Table 23: Default Basic Zone Parameters
Parameters
Default zone policy
Full zone set distribute
Enhanced zoning
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
154
Command or Action
zone compact vsan vsan-id
Example:
switch(config)# zone compact vsan 42
Configuring and Managing Zones
Purpose
Compacts the zone database for the specified
VSAN to recover the zone ID released when
a zone was deleted.
Default
Denied to all members.
The full zone set(s) is not distributed.
Disabled.
OL-30895-01