Applying System Service Policies - Cisco Nexus 5500 Series NX-OS Configuration Manual

Applying System Service Policies

Applying System Service Policies
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
This example shows how to apply system service policies.
switch# configure terminal
switch(config)# system qos
switch(config-sys-qos)# service-policy type queuing input fcoe-default-in-policy
switch(config-sys-qos)# service-policy type queuing output fcoe-default-out-policy
switch(config-sys-qos)# service-policy type qos input c1
switch(config-sys-qos)# service-policy type network-qos p1
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
212
Command or Action
switch# configure terminal
switch(config)# system qos
switch(config-sys-qos)# service-policy type
queuing input fcoe-default-in-policy
switch(config-sys-qos)# service-policy type
queuing output fcoe-default-out-policy
switch(config-sys-qos)# service-policy {type
{qos input}} policy-map-name
switch(config-sys-qos)# service-policy {type
{network-qos}} policy-map-name
Configuring iSCSI TLV
Purpose
Enters global configuration mode.
Enters system class configuration mode.
Applies the input queuing FCoE policy map
to an interface.
Applies the output queuing FCoE policy
map to an interface.
Attaches a policy map of type qos to an
interface.
Attaches a policy map of type network-qos
to an interface.
OL-30895-01