Committing Changes; Discarding Changes - Cisco Nexus 5500 Series NX-OS Configuration Manual

Configuring Fibre Channel Domain Parameters
• A pending configuration is created by copying the active configuration. Subsequent modifications are
made to the pending configuration and remain there until you commit the changes to the active
configuration (and other switches in the fabric) or discard them.

Committing Changes

You can commit pending domain configuration changes and release the lock.
To apply the pending domain configuration changes to other SAN switches in the VSAN, you must commit
the changes. The pending configuration changes are distributed and, on a successful commit, the configuration
changes are applied to the active configuration in the SAN switches throughout the VSAN and the fabric lock
is released.
Procedure
Step 1
Step 2

Discarding Changes

You can discard pending domain configuration changes and release the lock.
At any time, you can discard the pending changes to the domain configuration and release the fabric lock. If
you discard (abort) the pending changes, the configuration remains unaffected and the lock is released.
Procedure
Step 1
Step 2
OL-30895-01
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
fcdomain commit vsan vsan-id
Example:
switch(config)# fcdomain commit vsan 45
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
fcdomain abort vsan vsan-id
Example:
switch(config)# fcdomain abort vsan 30
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
Domain IDs
Purpose
Enters global configuration mode.
Commits the pending domain
configuration changes.
Purpose
Enters global configuration mode.
Discards the pending domain
configuration changes.
41