Starting Scsi Lun Discovery; About Initiating Customized Discovery; Initiating Customized Discovery - Cisco Nexus 5500 Series NX-OS Configuration Manual

Information About SCSI LUN Discovery

Starting SCSI LUN Discovery

To start SCSI LUN discovery, perform this task:
Procedure
Step 1
Examples of Starting SCSI LUN Discovery
The following example discovers local SCSI targets for all operating systems (OSs):
switch# discover scsi-target local os all
discovery started
The following example discovers remote SCSI targets assigned to the AIX OS:
switch# discover scsi-target remote os aix
discovery started
The following example discovers SCSI targets for VSAN 1 and FC ID 0x9c03d6:
switch# discover scsi-target vsan 1 fcid 0x9c03d6
discover scsi-target vsan 1 fcid 0x9c03d6
VSAN:
PRLI RSP: 0x01 SPARM: 0x0012
SCSI TYPE: 0 NLUNS: 1
Vendor: Company 4 Model: ST318203FC
Other: 00:00:02:32:8b:00:50:0a
The following example discovers SCSI targets from the customized list assigned to the Linux OS:
switch# discover scsi-target custom-list os linux
discovery started

About Initiating Customized Discovery

Customized discovery consists of a list of VSAN and domain pairs that are selectively configured to initiate
a discovery. Use the custom-list option to initiate this discovery. The domain ID is a number from 0 to 255
in decimal or a number from 0x0 to 0xFF in hex.

Initiating Customized Discovery

To initiate a customized discovery, perform this task:
Procedure
Step 1
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
200
Command or Action
switch# discover scsi-target {custom-list | local | remote
| vsan vsan-id fcid fc-id} os {aix | hpux | linux | solaris
| windows} [lun | target]
1 FCID: 0x9c03d6 PWWN: 00:00:00:00:00:00:00:00
Command or Action
switch# discover custom-list add vsan vsan-id
domain domain-id
Purpose
Discovers SCSI targets for the specified
operating system (OS).
Rev: 0004
Purpose
Adds the specified entry to the custom list.
Discovering SCSI Targets
OL-30895-01